Your Professional 3mm Edge Banding Machine Manufacturer
A 3mm-capable edge banding machine applies and finishes edge tape up to 3 mm thick on straight furniture panels. Compared with thin decorative edge tape, 2–3 mm PVC or ABS edging provides greater impact resistance and allows a more pronounced rounded profile, making it suitable for commercial furniture, cabinet doors, worktops, shelves, office furniture, and frequently handled panel components.
Processing thicker edge tape requires sufficient pressure, accurate tape feeding, suitable trimming and corner-rounding tooling, stable panel transport, and correct glue temperature and feed settings. Yuehe offers different configurations according to the required edge material, thickness range, panel size, production speed, glue system, and finishing process.
The pressure rollers apply consistent force while the adhesive is active, helping the thick edge tape remain aligned and fully bonded to the prepared panel edge. Bond quality also depends on panel condition, edge material, adhesive type, glue temperature, feed speed, and ambient conditions.Contact our expert team, and we can provide you with a customized 3mm edge banding machine.
Yuehe 3mm Edge Banding Machines

For straight furniture panels requiring preheating, gluing, end trimming, fine trimming, scraping and polishing. Pre-milling and automatic corner rounding are not included in the listed configuration.

For straight panels requiring controlled front and rear end trimming. Confirm pre-milling and the remaining finishing units for the quoted configuration.

For continuous straight-panel production requiring separate rough and fine trimming. Confirm pre-milling separately; automatic corner rounding is not listed as standard.

For production requiring pre-milling, conveyor-based process synchronization, powered panel-thickness adjustment and separate rough and fine trimming.

For compatible PVC or ABS tape where both panel-edge preparation and finished front and rear corners are required. EVA is standard; PUR is optional.
Compare Yuehe 3mm Edge Banding Machine Models
| Model | Published feed speed | Key listed configuration | Corner rounding | PUR |
|---|---|---|---|---|
| ZY-360A | 12–23 m/min | End trimming; fine trimming | Not included | Optional, confirm in quote |
| ZY-360Y | 13–18 m/min | Twin-motor end trimming; pre-milling depends on quoted version | Not listed as standard | Confirm in quote |
| ZY-368 | 13–25 m/min | Separate rough and fine trimming | Not standard | Optional |
| ZY-368Y | 14–25 m/min | Pre-milling; encoder; rough and fine trimming | Not listed as standard | Optional |
| ZY-468J | 13–18 m/min | Pre-milling; rough and fine trimming; powered adjustment | Standard | Optional |
The listed model pages state an edge-tape range of 0.3–3 mm. Feed speed is the machine’s published conveying range, not a guarantee of daily panel output. Confirm the minimum panel size, edge-tape height, cutter radius, adhesive system and final processing units in the signed technical quotation.
How to Choose a 3mm Edge Banding Machine
| Selection factor | What to check | Why it matters |
|---|---|---|
| Edge tape | PVC or ABS grade, actual 3 mm thickness, tape height and finish | Determines feeding, adhesive and cutter compatibility |
| Panel size | Material, thickness, smallest length and width | Affects stable feeding and whether finishing units can process the workpiece |
| Edge profile | Required top/bottom radius and front/rear corner finish | Determines trimming tools and whether corner rounding is needed |
| Panel-edge condition | Saw marks, chipping and flatness before banding | Helps determine whether pre-milling is required |
| Adhesive | EVA or PUR, tape primer and operating schedule | Affects compatibility, cleaning and maintenance requirements |
| Output | Panel mix, daily target and shift length | Helps compare usable capacity rather than feed speed alone |
| Installation | Voltage, compressed air, dust extraction and floor space | Determines whether the quoted configuration can be installed |
Features of Yuehe 3mm Edge Banding Machine

The machine body structure is designed for the edge banding process of 3mm thick edge banding strips, ensuring a stable edge banding process, allowing the edge banding strip to adhere tightly to the edge of the panel.

Equipped with multiple sets of pressure rollers working together, pressure is applied to the 3mm thick edge banding strip, allowing the panel edge and edge banding strip to bond tightly, preventing warping, bulging, and delamination.

The pressure beam, conveyor chain, guide rail, and feeding components keep the panel aligned as it passes through each processing unit.

After edge banding is completed, it automatically trims away excess edge banding material, resulting in smoother, burr-free edges on the panel.
What Makes 3mm Edge Tape More Demanding to Process?
Compared with thinner decorative tape, 3 mm PVC or ABS edging requires careful matching of tape feeding, adhesive application, pressure, trimming tools and the required edge radius. Poor panel preparation or incorrect settings may lead to visible glue lines, lifting, trimming marks or uneven corners. The appropriate process depends on the actual panel, tape and adhesive rather than tape thickness alone.

Watch the 3 mm edge-banding sample test
Ask for a sample run using your panel material and 3 mm edge tape. Check adhesion, glue-line appearance, top and bottom edge profile, front and rear corners, and the smallest workpiece you intend to process. The quotation should identify the supplied trimming and corner-rounding tools, adhesive configuration and installation requirements.
How to Achieve Precise Edge Trimming
Yuehe Woodworking Machinery’s 3mm edge banding machine is equipped with upper and lower trimming units that remove excess edge material and form the specified profile along the panel. For 3 mm PVC or ABS tape, the cutter profile, tool condition, feed speed, tape quality, and panel alignment all affect the finished edge. For simultaneous trimming of both upper and lower edges. With a stable feeding system, after the edge banding is completed, the equipment uses a stable trimming structure to cut and correct any excess edge banding material and burrs, ensuring that your furniture production line’s panels are straight, smooth, and aesthetically pleasing.

3mm Edge Banding Machine with One-Touch Switching and Noise Reduction Design
Easily switch between various panel and edge banding specifications, ensuring a smooth and quiet edge banding process.
Yuehe Woodworking Machinery’s 3mm edge banding machine features a visual operating system and quick adjustment controls. Stored operating recipes and motorized adjustments can reduce setup time when switching between approved panel and edge-tape specifications. The operator should complete and verify the setup before feeding the next workpiece. improves the production efficiency of your mixed-material furniture production line.
Yuehe Woodworking Machinery’s 3mm edge banding machine utilizes noise reduction technology in its key transmission components. With a stable machine body and a smooth feeding system. If noise reduction is a purchasing advantage, publish the measured sound-pressure level, test distance, operating configuration, and comparison conditions.
It means the listed configuration can process compatible edge tape up to 3 mm thick. It does not mean the panel is 3 mm thick.
The current model pages list a 0.3–3 mm tape range, but changing tape thickness may require adjustments to feeding, pressure, trimming and scraping. Confirm the required tools for each tape specification.
No. Corner rounding is model- and configuration-dependent. Specify the required corner radius and send a sample or drawing before ordering.
No. Tape thickness alone does not determine the adhesive. Confirm the panel, tape primer, intended environment and operating schedule before choosing EVA or an optional PUR configuration.
Send your panel material and minimum/maximum dimensions, edge-tape material and thickness, required edge radius, adhesive preference, daily output, voltage and sample or drawing.











